ADT Pulse OC835-ADT Quick Installation Manual page 16

Chapter 3 ADT Pulse Enrollment
7. Enter the PIN number in the WPS PIN field.
8. Ensure that the camera is powered on, and then click the Continue button to
initiate the WPS process.
The following screen appears.
9. Press and hold the WPS/RESET button on the
camera for 5 seconds to establish a wireless
connection.
The Network/WPS LED flashes amber as the TS
Base attempts to connect to the camera. The
wireless connection is successful when the
Network/WPS LED turns solid green.
Note: You must complete the WPS connection
within 2 minutes or else the process will time out.
The time remaining is displayed in the upper left
portion of the screen.
16 OC835-ADT Outdoor HD Camera Installation Guide