Electrical Connections (Retrofit) - Webasto Thermo Top Z Installation Instructions Manual

TZea_02_gb_e.fm Seite 48 Montag, 3. Februar 2003 2:09 14

Electrical connections (retrofit)

13 Electrical connections (retrofit)
13.1. Control module / heater connection
Make the electrical connections to the heater as shown in Figure 19.
13.2. Installation and connection of the timer
Install the timer as shown in Figure 17. A drilling template is supplied.
Connect the timer as shown in the circuit diagram in Figure 19.
Fig. 17: Timer installation
NOTE:
Do not press on the display panel during installation.
48
Thermo Top Z / Thermo Top C
13.3. Vehicle fan (auxiliary heater only)
The vehicle fan is controlled by the vehicle fan relay, see the circuit
diagram in Figure 19.
NOTE:
The connection in the control module (heating system) is designed for
one fan relay (Imax = 0.5 A).
13.4. To install Telestart (optional)
Install the Telestart as set out in its installation instructions.
Follow the operating and maintenance instructions to train the Telestart
transmitter.
13.5. To install Thermo Call (optional)
Install the Thermo Call as set out in the Thermo Call installation
instructions.