Seeley CP15HW1 Owner's Manual page 10

OPERATION cont.
Timer Function
The air conditioner is fitted with a timer
function. This can be set up to 24 hours in
advance. To use this function, the cooler
must be plugged in and ready to operate.
Step : Setting the timer 8
With the air conditioner ON, press the
TIMER button on the emote ontrol or R C
C ontrol anel P to set the number of hours
before the air conditioner powers off.
The ontrol anel display will flash and C P
show the time setting. Press the or
button to increase s or decrease the time in
1 hour increments from 1 - 24hrs. After 10
seconds the display will stop flashing and
the TIMER indicator will be lit on the display
panel (Fig 7).
When the air conditioner is OFF (but still
plugged in), repeat the above to set the
number of hours before the cooler powers
ON. The air conditioner will start up with the
last settings used.
Note! When the air conditioner is working,
only the TIMER OFF can be set. When the
air conditioner is off, only the TIMER ON
can be set.
How to cancel the timer
To cancel the timer, set the timer to '00' . The
TIMER indicator will stop glowing.
8 CP15HW1 Portable Reverse Cycle Air Conditioner