Gigaset DX800A all in one User Manual page 33

f.
INT 1
Connection for
outgoing calls
f
MSN1
Back
If handsets are already registered to the base, you are requested to assign send and
receive connections for the handsets. The following is shown in the display:
Assign connections to handset INT ...?
¤
Perform steps a. to f. for each registered handset.
Subsequently, you are requested to assign the receive connections to the three
answering machines on the base. "Assign connections to answering machine ?"
is shown in the display.
¤
Perform steps a. to d. for each answering machine.
Please note: Each connection may only be assigned to one of the three local
answering machines as a receive connection. If you assign a receive connection to
an answering machine and this connection is already assigned to another answer-
ing machine, the "old" assignment is deleted.
After successfully configuring the settings, you will briefly see the following display:
Connection Wizard
‰
Connection
assignment
complete.
If the base is to make calls via a differ-
ent connection/phone number:
¤
Press right on the control key v
repeatedly, until the required
g
connection is displayed.
Save
¤
Press the display key
the settings.
First steps
§Save§
to save
31