Gigaset DX800A all in one User Manual page 16

First steps
4. Connecting the base with a router (Internet) or PC
For the Gigaset DX800A all in one, the connection to a router is mainly needed for
the Internet telephony VoIP (Voice over Internet Protocol). You can set up and con-
figure up to six accounts (VoIP phone numbers) from one or several VoIP provider(s)
on the base.
All variants of the base require a connection to a router for the following features
of the phone:
u
You wish to be notified as soon as new software is available for your base on the
Internet and load this onto your base.
u
The date and time on your base should be updated by a time server on the Inter-
net.
u
You wish to go online with your base, i.e., use the Info Centre, display info serv-
ices or search for phone numbers in an online directory.
The base will have to be connected to a PC (via a router or directly) if you wish to
use the following features of your base:
u
You wish to set up the base using its Web configurator.
u
You wish to use the additional PC software, "Gigaset QuickSync over Ethernet"
to dial numbers via the PC (e.g., numbers from a PC directory) or to load images
or melodies from the PC to your base.
For Internet access you need a router connected to the Internet via a modem (this
may be integrated in the router).
Note on Gigaset DX800A all in one
u
For telephony via the Internet, you need a broadband Internet connection
(e.g., DSL) with flat rate (recommended) or volume rate and a router that con-
nects your phone to the Internet. You can find a list of recommended routers
on the Internet at:
www.gigaset.com/service
From here, go to the FAQ page and select your Gigaset IP telephone. Search
for "Router", for example.
u
The base has a second LAN connection which you can use, e.g., to connect
your PC to the Internet (router).
u
Data protection notice: Further information about the Gigaset.net service
data saved can be found at
www.gigaset.net/privacy-policy
14