Attachment And Replacement Of Module; Notes On Installing Receiver (Anti-Noise Measures) - Ko Propo EX-10 Eurus Instruction Manual

Attachment and replacement of module

Attach module as shown. When detaching, press both side of tabs on
the module and pull out module.
For frequency change (2.4GHz, 27MHz, 40MHz), replace module.
Caution!
Turn off transmitter before module replacement.
Caution!
Attach retractable antenna (optional available) when using frequency
27MHz or 40MHz.
Caution!
Refer to instruction manual included in module.

Notes on installing receiver (anti-noise measures)

Keep antenna cable far away from noise source!
Be careful of noise! Be careful of noise!
Assume that all areas where large currents are flowing are
generating noise! Locate antenna cable and receiver as far
away from the motor, ESC, silicone cables as possible (material
such as metal or carbon chassis also conduct noise).
R/C model is controlled by radio wave. Therefore, anti-noise
measure is the most important factor. Take measures to ensure
optimum performance of your R/C model and driving technique.
Carbon chassis
Receiver
ESC
Battery
Silicone cable
RF Module
Motor
11