Misfeed In The Fixing Section - Utax CDC 1526 Instruction Handbook Manual

Section 9 TROUBLESHOOTING
5
Close right cover 1.
6
Push the paper conveyor unit back into the copier.
9-12

Misfeed in the fixing section

The screens shown below indicate that there is a misfeed in the
fixing section. Perform the following procedure to remove the
jammed paper.
Inch specifications
Paper misfeed.
JAM
Metric specifications
Paper misfeed.
JAM
1
Open the left cover.
2
If you see jammed paper, pull it from the fuser unit taking
care not to tear it. If the jammed paper is difficult to pull
out, rotate the green fuser unit gear as you pull.
3
Pull the green lock levers on the right and left towards you,
and open the fuser unit cover.
1. Open left cover.
2. Remove paper.
3. Pull out fuser unit.
4. Check the inside of machine and
Remove paper if inside.
5. Open cover of fuser unit.
Remove paper if inside.
6. Close fuser unit,
close cover.
1. Open left cover.
2. Remove paper.
3. Pull out fuser unit.
4. Check the inside of machine and
Remove paper if inside.
5. Open cover of fuser unit.
Remove paper if inside.
6. Close fuser unit,
close cover.