Margin Width - Utax CDC 1526 Instruction Handbook Manual

Section 7 COPIER MANAGEMENT

Margin width

Perform the following procedure to determine the default value of
the location and width of the margins in the margin mode.
1
Display the "Copy default" screen.
(See "Accessing the copy default settings" on
page 7-69.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
2
Select "Default margin width" under the "Default menu"
column on the left side of the touch panel and then press
the "Change #" key.
The "Default margin width" screen will be displayed.
Inch specifications
Default setting / Counter
Copy default
Default menu
Sort Sort:On
Auto Rotation Rotate
Default margin width Left
Default erase width Border
Preset limit 999 Set
Default setting
Metric specifications
Default setting / Counter
Copy default
Default menu
Sort Sort:On
Auto Rotation Rotate
Default margin width Left 6mm 0mm
Default erase width Border 6mm Center 12mm
Preset limit 999 Set
Default setting
7-92
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
Setting mode
Up
Down
1 / " 0"
4
1 1
/ " Center / "
4 2
Change #
Setting mode
Up
Down
Change #
3
Press the " " key, the " " key, the " " key or the " " key,
as desired, to change the default margins and margin
widths to the desired setting.
Inch specifications
Default margin width
Adjust default setting of margin width.
End
Default setting - Copy default
Metric specifications
Default margin width
Adjust default setting of margin width.
End
Default setting - Copy default
NOTE
If you want to quit the displayed setting without changing
it, press the "Back" key. The touch panel will return to the
screen in step 2.
4
Press the "Close" key.
The touch panel will return to the screen in step 2.
5
Press the "Close" key once again.
The touch panel will return to the "Default setting" screen.
6
Press the "End" key.
Close
The touch panel will return to the contents of the "Basic"
tab.
Close
Back
Front page
(0~ / )
3
4
0
"
(0~ / )
3
4
/
1
"
Left
4
Back
Front page
(0~18)
0
mm
(0~18)
6
mm
Left
Close
Close