Status Report - Utax CDC 1526 Instruction Handbook Manual

Section 7 COPIER MANAGEMENT
2
Press the "Print report" key.
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
3
Use the keypad to enter the 4-digit management code.
The factory default setting is "2600".
Inch specifications
Enter the administrator number.
Metric specifications
Enter the administrator number.
NOTE
It is possible for you to change the 4-digit management
code. (See "Changing the management code" on
page 7-60.)
7-112
Language Management
Bypass Counter
setting check
Register Print User
Adjustment
orig. size report
Language Management
Bypass Counter
setting check
Register Print User
Adjustment
orig. size report
4
Once the "Print report menu" screen is displayed, press the
key of the report that you want to print out.
Inch specifications
Print report
End
Print report menu
Copy
report
Machine
report
Default setting
Metric specifications
Print report
End
Print report menu
Copy
report
Machine
report
Default setting
NOTES
• Make sure there is 11" × 8
one of the drawers[cassettes] when you print out a

status report.

Close
• If you press the "Toner coverage" key, the 4 different
toner coverage reports will be printed out together.
Close
Toner
coverage
Tot. toner Prt. toner
coverage coverage
Copy toner Fax toner
coverage coverage
Toner
coverage
Tot. toner Prt. toner
coverage coverage
Copy toner Fax toner
coverage coverage
" [A4] size paper loaded in
1/2
Close
Close