Paper Selection - Utax CDC 1526 Instruction Handbook Manual

Section 7 COPIER MANAGEMENT

Paper selection

Perform the following procedure to set whether the copier will
automatically select the same size of copy paper as the original
once an original is set, or whether the designated default
drawer[cassette] will be automatically selected.
1
Display the "Copy default" screen.
(See "Accessing the copy default settings" on
page 7-69.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
2
Select "Select paper" under the "Default menu" column on
the left side of the touch panel and then press the "Change
#" key.
The "Select paper" screen will be displayed.
Inch specifications
Default setting / Counter
Copy default
Default menu
Eco Print Off
Select paper APS
Pap. Type(Auto col. pap.) Plain
Paper Type(Auto BW Paper) Off
Default drawer 2nd paper
Default setting
Metric specifications
Default setting / Counter
Copy default
Default menu
Eco Print Off
Select paper APS
Pap. Type(Auto col. pap.) Plain
Paper Type(Auto B&W paper) Off
Default cassette 2nd paper
Default setting
7-76
Language Management
Bypass Counter
setting check
Register Print User
Adjustment
orig. size report
Language Management
Bypass Counter
setting check
Register Print User
Adjustment
orig. size report
Setting mode
Up
Down
Change #
Setting mode
Up
Down
Change #
3
Press the "APS" key to have the same size of copy paper as
the original selected automatically, and the "Default
drawer[cassette]" key to have paper fed from the
designated default drawer[cassette].
Inch specifications
Select paper
Set auto paper selection mode.
Default setting - Copy default
End
Metric specifications
Select paper
Setting paper select mode.
Default setting - Copy default
End
NOTE
If you want to quit the displayed setting without changing
it, press the "Back" key. The touch panel will return to the
screen in step 2.
4
Press the "Close" key.
The touch panel will return to the screen in step 2.
5
Press the "Close" key once again.
The touch panel will return to the "Default setting" screen.
6
Press the "End" key.
The touch panel will return to the contents of the "Basic"
Close
tab.
Close
Back
APS
Default
drawer
Back
APS
Default
cassette
Close
Close