Drum Refresh - Utax CDC 1526 Instruction Handbook Manual

Section 7 COPIER MANAGEMENT

Drum refresh

Perform the following procedure if it seems like the printed image
is blurred or running, or if there are unprinted white areas on the
page. The drum refreshing operation will take approximately
5 minutes.
1
With the content of the "Basic" tab displayed, press the
[Default Setting/Counter] key.
The "Default setting" screen will be displayed.
2
Press the "User adjustment" key.
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
7-106
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
3
Press the "Drum refresh" key. The "Drum refresh" screen
will be displayed.
Inch specifications
Default setting / Counter
User adjustment
Auto gray
adjust
Default setting
Metric specifications
Default setting / Counter
User adjustment
Auto Grey
Adjust
Default setting
4
Press the "On" key. The drum refreshing process will begin.
This operation will take approximately 5 minutes.
End
Inch specifications
Drum refresh
Refresh the drum when image blur or white dots appear
on the image.
Default setting - User adjustment
End
Metric specifications
Drum refresh
Refresh the drum when image blur or white dots appear
on the image.
Default setting - User adjustment
Drum
refresh
Drum
refresh
Close
Close
Close
On
Close
On