Table of Contents
Advertisement
Section 8 OPTIONAL EQUIPMENT
4
Set the originals to be copied.
Verify the direction in which the originals were set.
5
Press the [Start] key.
Scanning of the originals will start and the number of
originals that was set will be displayed.
6
Copying will start and each finished copy will be
automatically hole punched and ejected onto the Finisher.
7
Once copying is completed, remove the finished copies from
the Finisher.
8-14
Selecting the copy eject location
1
Press the "Function" key, "Down" key, and then the "Select
of Output" key.
This will display the Select of Output screen
Inch specifications
Ready to copy. (Full-Color)
Auto
OHP
Proof Copy
Rotation
backing
Orig. set
Eco Print
Invert
direction
Modify
Select of
Sharp
Copy
Output
-ness
Basic
User choice
Function
Metric specifications
Ready to copy. (Full Col.)
Auto
OHP back
Test copy
Rotation
Orig. set
Eco Print
Invert
direction
Modify
Select of
Sharp
copy
Output
-ness
Basic
User choice
Function
2
Select the copy eject location.
Inch specifications
Ready to copy.(Full-color)
Select of Output
Top tray
Tray 3
Tray A
Tray 4
Tray 1
Tray 5
Tray 2
Metric specifications
Ready to COPY.(Full Col.)
Select of Output
Top tray
Tray 3
Tray A
Tray 4
Tray 1
Tray 5
Tray 2
3
Press the "Close" key.
This will return to the screen in step 1.
4
Place the document on the copier.
5
Press the [Start] key.
This will start scanning of the document and display the
number of pages.
NOTE
If you are not using a document processor, repeat steps 4
and 5 for all of the document pages. After all of the pages
have been scanned, press the "End" key.
6
As copying is performed, the pages are ejected to the tray
you selected.
7
Remove the ejected copies after copying is complete.
Paper Size
Set
11x8
1
/
"
2
Memo
pages
Mirror
Up
Gloss
Down
Mode
Color func.
Program
Paper Size
Set
Memo
pages
Mirror
Up
Gloss
Down
print
Colour func.
Program
set
Resistet
Back
Close
Select proper output tray to avoid
mixing jobs.
You can confirm output tray with output
management.
set
Resistet
Back
Close
Select proper output tray to avoid
job mixing.
You can confirm output tray with output
management.
Advertisement
Table of Contents
