Original Size Registration - Utax CDC 1526 Instruction Handbook Manual

Section 7 COPIER MANAGEMENT

Original size registration

Perform the following procedure in order to register a custom
original size that can be used under the "Original size selection"
procedure.
1
With the content of the "Basic" tab displayed, press the
[Default Setting/Counter] key.
The "Default setting" screen will be displayed.
2
Press the "Register orig. size" key.
The "Register orig. size" screen will be displayed.
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
7-102
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
3
Select of the "Original size (custom 1)" to "Original size
(custom 4)" settings under the "Default menu" column on
the left side of the touch panel and then press the "Change
#" key.
The corresponding setting screen will be displayed.
Inch specifications
Default setting / Counter
Register orig. size
Original size (custom 1)
Original size (custom 2)
Original size (custom 3)
Original size (custom 4)
Default setting
Metric specifications
Default setting / Counter
Register orig. size
Original size (custom 1)
Original size (custom 2)
Original size (custom 3)
Original size (custom 4)
Default setting
End
End
Default menu Setting mode
2x2"
2x2"
2x2"
2x2"
Default menu Setting mode
50x50mm
50x50mm
50x50mm
50x50mm
Close
Up
Down
Change #
Close
Up
Down
Change #