Copy Limit - Utax CDC 1526 Instruction Handbook Manual

Section 7 COPIER MANAGEMENT

Copy limit

Perform the following procedure to set the limit for the number of
copies (or copy sets) that can be made at a time.
1
Display the "Copy default" screen.
(See "Accessing the copy default settings" on
page 7-69.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
2
Select "Preset limit" under the "Default menu" column on
the left side of the touch panel and then press the "Change
#" key.
The "Preset limit" screen will be displayed.
Inch specifications
Default setting / Counter
Copy default
Default menu
Sort Sort:On
Auto Rotation Rotate
Default margin width Left
Default erase width Border
Preset limit 999 Set
Default setting
Metric specifications
Default setting / Counter
Copy default
Default menu
Sort Sort:On
Auto Rotation Rotate
Default margin width Left 6mm 0mm
Default erase width Border 6mm Center 12mm
Preset limit 999 Set
Default setting
7-94
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
Setting mode
Up
Down
1 / " 0"
4
1 1
/ " Center / "
4 2
Change #
Setting mode
Up
Down
Change #
3
Press the "+" key or the "-" key to change the copy limit to
the desired setting.
Inch specifications
Preset limit
Set output quantity.
Default setting - Copy default
End
Metric specifications
Preset limit
Select copy preset in one job. (# key)
Default setting - Copy default
End
NOTE
If you want to quit the displayed setting without changing
it, press the "Back" key. The touch panel will return to the
screen in step 2.
4
Press the "Close" key.
The touch panel will return to the screen in step 2.
5
Press the "Close" key once again.
The touch panel will return to the "Default setting" screen.
6
Press the "End" key.
The touch panel will return to the contents of the "Basic"
Close
tab.
Close
Back
( 1~999)
999
Set
Back
( 1~999)
999
Set
Close
Close