Toshiba e-Studio 352 Printing Manual page 42

2 Installing Client Software for Windows
10
Continue to configure the Raw TCP or LPR port.
The procedure to configure the Raw TCP or LPR port differs depending on the version of
Windows used.
P.40 "Configuring the Raw TCP/LPR port for Windows 2000/XP/Server 2003"
P.45 "Configuring the LPR port for Windows NT 4.0"
Configuring the Raw TCP/LPR port for Windows 2000/XP/Server 2003
After you install the client software using the installer in the Client Utilities CD-ROM, create the
Raw TCP or LPR port.
The following describes an installation on Windows XP. The procedure is the same when Win-
dows 2000 or Windows Server 2003 is used.
For instructions on how to install the client software, see the following section.
P.35 "Installing the client software for Raw TCP/LPR printing using the installer"
You must log into Windows as a user who has the "Administrators" or "Power Users" privilege
when using Windows 2000, Windows XP, or Windows Server 2003.
1
After installing the client software, click [Start] and click [Printers
and Faxes] to open the Printers and Faxes folder.
If you are using the Windows 2000, click [Start], select [Settings], and click [Printers]
to open the Printers folder.
40 Installing Client Software for Raw TCP/LPR Printing