Toshiba e-Studio 352 Printing Manual page 231

If the print job has several pages in the document, only the first page of the document will
be saved as an overlay file.
Both the overlay file and the documents on which you superimpose the overlay image
must be created at the same size, and orientation.
When printing with Overlay Image using the PS3 printer driver from an application that
can create the PS command directly, the overlay image will not be printed. In that case,
disable the "Use PostScript Passthrough" option in the PostScript Settings dialog box.
P.231 "PostScript Settings"
If you want to use an overlay image in your job, you must first create an overlay file. To cre-
ate an overlay image, create an overlay image with most applications and print it as an over-
lay file. You can enable creating an overlay file on the Print Job Tab.
P.215 "Print Job Tab"
[Delete]
Click this to delete the overlay image that you select in the drop down box.
Print over the document
Check this to print overlay image over the document.
3) Rotate 180 degrees
Check on this to perform rotation printing of an image.
4) Mirror
Check on this to perform mirror printing of an image. This print option is available only for
the PS3 printer driver.
The mirror printing may not be applied when the application gives priority to the applica-
tion's PostScript settings over the printer driver settings.
When printing from Adobe Acrobat or similar applications, the mirror printing does not
work if the "Use PostScript Passthrough" option is enabled in the PostScript settings. To
use the mirror printing, please disable the "Use PostScript Passthrough" option in the
PostScript settings.
5) Negative/Positive
Check on this to perform negative printing of an image. This print option is available only for
the PS3 printer driver.
The Negative/Positive option is available only when "Mono" is selected at the "Color"
drop down box on the Setup tab.
The negative printing may not be applied when the application gives priority to the appli-
cation's PostScript settings over the printer driver settings.
When printing from Adobe Acrobat or similar applications, the Negative/Positive printing
does not work if the "Use PostScript Passthrough" option is enabled in the PostScript set-
tings. To use the Negative/Positive printing, please disable the "Use PostScript
Passthrough" option in the PostScript settings.
6) Toner Save
Check this to print in toner save mode.
Setting Up Print Options 229