Finishing Options - Toshiba e-Studio 352 Printing Manual

6 Printing from Macintosh
3) Border
Select whether a border line is to be drawn on each page. It is available only when the N-up
printing (printing a page on multiple sheets) is set.
- None — Select this if no border line to be drawn.
- Single hairline — Select this to draw a single hairline for the border.
- Single thin line — Select this to draw a single thin line for the border.
- Double hairline — Select this to draw a double hairline for the border.
- Double thin line — Select this to draw a double thin line for the border.
4) Print on Both Sides
Check this to print on both sides of the paper. When checked, select the binding direction at
the "Binding" option.
5) Binding
This sets the type of binding for 2-sided-printed pages.
- Long Edge Binding — Select this to bind along the long edge side of paper. The direc-
tion to be printed on the back side of the paper differs depending on the orientation.
Portrait
1
- Short Edge Binding — Select this to bind along the short edge side of paper. The direc-
tion to be printed on the back side of the paper differs depending on the orientation.
Portrait
1

Finishing Options

In the Finishing Options menu, you can set the destination, hole punching and stapling features.
1
2
3
1) Destination
This selects the output destination tray.
- Inner Tray — Select this when no finisher is installed.
- Tray 1 — Select this to route the output to the upper tray of the Finisher.
- Tray 2 — Select this to route the output to the lower tray of the Finisher.
- Job Separator Upper — Select this to route the output to the upper tray of the Job Sep-
arator.
300 Printing from Application on Mac OS 8.6 to 9.x
Landscape
1
Landscape
1