Greenlee DM-860A Instruction Manual page 18

Accuracy
Refer to the "Specifications" section for operating conditions and temperature coefficient.
Accuracy is specified as follows: ± (a percentage of the reading + a fixed amount) at 23 °C ± 5 °C
(73.4 °F ± 9 °F), 0% to 75% relative humidity. Specifications are for 50,000 counts mode.
True RMS Readings: Voltage and current accuracies are specified from 5% to 100% of the range
unless otherwise specified. Frequency must be within the specified bandwidth for non-sinusoidal
waveforms. Crest factors are as follows:
• Crest factor < 2.1:1 at full scale
• Crest factor < 4.2:1 at half scale
AC, DC AC , and AC + DC
Accuracy at DC
Range
and 50 Hz to 60 Hz
500.00 µA ± (0.5% + 0.5 µA)
5000.0 µA ± (0.5% + 5.0 µA)
50.000 mA ± (0.5% + 0.05 mA) ± (0.7% + 0.05 mA) ± (2.0% + 0.05 mA) ± (5.0% + 0.05 mA)
500.00 mA ± (0.5% + 0.5 mA)
5.0000 A ± (0.5% + 0.005 A) ± (0.7% + 0.005 A)
10.000 A* ± (0.5% + 0.05 A)
*
10 A continuous; 20 A maximum (Duty Cycle: 30 seconds on, 5 minutes off).
Burden Voltage
Range
(all frequency ranges)
500.00 µA
5000.0 µA
50.000 mA
500.00 mA
5.0000 A
10.000 A
DC Current
Range Accuracy
500.00 µA ± (0.15% + 0.2 µA)
5000.0 µA ± (0.1% + 2.0 µA)
50.000 mA ± (0.15% + 0.02 mA)
500.00 mA ± (0.15% + 0.3 mA)
5.0000 A ± (0.5% + 0.002 A)
10.000 A* ± (0.5% + 0.02 A)
* 10 A continuous; 20 A maximum (Duty Cycle: 30 seconds on, 5 minutes off).
18
AC Current
Accuracy at
40 Hz to 1 kHz
± (0.7% + 0.5 µA)
± (0.7% + 5.0 µA)
± (0.7% + 0.5 mA)
± (0.7% + 0.05 A)
0.15 mV/µA
3.3 mV/mA
45 mV/A
Burden Voltage
Accuracy at
1 kHz to 20 kHz
± (2.0% + 0.5 µA)
± (2.0% + 5.0 µA)
± (2.0% + 0.5 mA)
Unspecified
Unspecified
0.15 mV/µA
3.3 mV/mA
45 mV/A
Accuracy at
20 kHz to 100 kHz
± (5.0% + 0.5 µA)
± (5.0% + 5.0 µA)
± (5.0% + 0.5 mA)
Unspecified
Unspecified