Managing D-Link Dfl-1100; Resetting The Dfl1100 - D-Link DFL-1100 Manual

Managing D-Link DFL-1100

When a change is done
to the configuration a new
icon named
Changes
will appear. When
all changes and administrator
would like to do is done the
changes need to be saved and
activated to take effect, this is
done by clicking on the Activate
Changes button on the Activate
Configuration Changes page.
What will happen is that the
firewall will
configuration and
letting the new changes take
effect. But for the changes to
become permanent the admin
need to login again. This have
to be done
configurable timeout has been
reached, this can be set on the
Activate Configuration Changes
page, by choosing the time
from the dropdown menu.
Resetting the DFL-1100
To reset the DFL-1100 to
factory default settings you
must shorten pin 7 and 9 (it's
also possible to shorten 7, 8
and 9) of the serial-console port
directly after powering on the
unit. You will first hear one
beep, which will indicate that
the unit has started to boot.
Keep the pins shortened in until
you hear two
beeps. After this
release the shortened pins and
the DFL-1100 will continue to
load and startup in default
mode, i.e. with 192.168.1.1 on
the LAN interface.
Activate
save the
reload it,
before a
consecutive
you can
10