Blurred Image - Konica Minolta bizhub PRO C6501 Troubleshooting Manual

16 Blurred image

[Symptom]
Toner scatters around color characters as if the characters are blurred.
[Probable cause]
More toner is attached on multiple-color character than on single color character. As toner
layer is thick, discharge may occur during image transfer process, causing toner scattering to
occur.
[Solution]
Reduce toner attachment quantity of the color of blurred character and then perform the
controller calibration.
For example: If the character is red, lower [Maximum toner quantity] of yellow and magenta.
[Utility / Counter] => [03 Machine Admin. Setting] => [01 System Setting] => [05 Expert Setting]
=> [06 Process Adjustment] => [03 Toner Quantity/Exposure]
Table of contents
21