Oil And Filter Change - Polaris Sportsman 570 EFI Owner's Manual

Engine Oil

Oil and Filter Change

Always change the oil and filter at the intervals outlined in the Periodic
Maintenance Chart beginning on page 76. Always change the oil filter
whenever changing oil.
1. Position the vehicle on a level
2. Start the engine. Allow it to warm
3. Stop the engine.
4. Clean the area around the drain
5. Place a drain pan under the crank
6. Remove the drain plug. Allow the
CAUTION! Hot oil can cause burns to
skin. Do not allow hot oil to contact skin.
7. Install a new sealing washer on
8. Reinstall the drain plug. Torque to 14-18 ft. lbs. (19-24 Nm).
9. Place shop towels beneath the oil filter. Using an oil filter wrench
10. Using a clean dry cloth, clean the filter sealing surface on the
Downloaded from www.Manualslib.com
surface.
up at idle for two to three
minutes.
plug.
case.
oil to drain completely.
the drain plug. The sealing
surfaces on drain plug and crankcase should be clean and free of
burrs, nicks or scratches.
(available from your POLARIS dealer), turn the filter counter-
clockwise to remove it.
crankcase.
manuals search engine
MAINTENANCE
Drain Plug
Front View of the Engine
Oil
Filter
83