Polaris Sportsman 570 EFI Owner's Manual page 70

WINCH GUIDE
Winch Operation
5. Never remove the hook strap from the hook.
6. Release the winch clutch and pull out the winch cable.
7. Pulling out as much cable as possible maximizes the winch's pulling
capacity. Always be sure that at least five (5) full turns of winch
cable are wrapped around the winch drum at all times. The friction
provided by this wrapped cable allows the drum to pull on the
winch cable and move the load.
8. Read and adhere to the following information for winch damping to
ensure safe winch use.
A.
B.
C. On a long pull, it may be necessary to stop winching so that the
D. Avoid being directly in line with the winch cable whenever possible.
9. Never hook the winch cable back onto itself. This will damage the
winch cable and may result in winch cable failure.
10. Never use straps, chains or other rigging items that are damaged or
worn.
68
Downloaded from www.Manualslib.com
In order to absorb energy that could be released by a winch cable
failure, always place a "damper" on the winch cable. A damper can be
a heavy jacket, tarp, or other soft, dense object. A damper can absorb
much of the energy released if a winch cable breaks when winching.
Even a tree limb can help as a damper if no other items are available to
you.
Lay the damper on top of the mid-point of the winch cable length that is
spooled out.
damper can be repositioned to the new mid-point of the winch cable.
Always release the tension on the winch cable before repositioning the
damper.
Also, never permit others to stand near or in line with the winch cable
during winch operation.
manuals search engine