Instrument Cluster
Digital/Analog Gauge
Rider Information Center
Clock Mode
Tip: The clock must be reset any time the battery has been disconnected or
1. Turn the key to the ON position. Use the MODE button to toggle to
2. Press and hold the MODE button until the hour segment flashes.
3. With the segment flashing, tap the MODE button to advance to the
4. Press and hold the MODE button until the next segment flashes.
5. Repeat steps 3-4 twice to set the 10-minute and 1-minute segments.
6.
Odometer Mode
The odometer records and displays the distance traveled by the ATV.
Trip Meter Mode
The trip meter records the distance traveled by the ATV if reset before
each trip. To reset, select the trip meter mode. Press and hold the MODE
button until the meter resets to zero. In the Rider Information Center, the
trip meter display contains a decimal point, but the odometer displays
without a decimal point.
Hour Meter Mode
This mode logs the total hours the engine has been in operation.
Downloaded from
www.Manualslib.com
discharged.
the odometer display.
Release the button.
desired setting.
Release the button.
After completing the 1-minute segment, step 4 will save the new
settings and exit the clock mode.
Turn the key to the OFF position.
manuals search engine
FEATURES AND CONTROLS
39