Polaris Sportsman 570 EFI Owner's Manual page 47

Break-In Period
Engine and Drivetrain Break-in
1. Fill the fuel tank with gasoline. See page 31. Always exercise
2. Check the oil level on the dipstick. See page 82. Add oil if
3. Drive slowly at first. Select an open area that allows room to
4. Vary the throttle positions. Do not operate at sustained idle.
5. Perform regular checks on fluid levels, controls and areas outlined
6. Pull only light loads.
7. Change both the oil and the filter at 25 hours.
8. Check fluid levels of transmission and all gearcases after the first 25
PVT Break-in (Clutches/Belt)
A proper break-in of the clutches and drive belt will ensure a longer life
and better performance. Break in the clutches and belt by operating at
slower speeds during the break-in period as recommended. Pull only
light loads. Avoid aggressive acceleration and high speed operation
during the break-in period.
If a belt fails, always clean away all debris when replacing the belt.
Downloaded from www.Manualslib.com
extreme caution whenever handling gasoline.
necessary to maintain the level between the safe and add marks.
familiarize yourself with vehicle operation and handling.
on the daily pre-ride inspection checklist. See page 48.
hours of operation and every 100 hours thereafter.
manuals search engine
OPERATION
45