Camber and Caster
The camber and caster are non-adjustable.
Rear Spring
The rear shock absorber spring is adjusted
by rotating the cam either clockwise or
counter-clockwise to increase or decrease
spring tension.
Accessory springs are available through
your POLARIS dealer.
Handlebars
The handlebars can be adjusted for rider
preference.
WARNING! Improper adjustment of the
handlebars or incorrect torquing of the adjuster
block tightening bolts can cause limited steering
or loosening of the handlebars, resulting in loss
of control and serious injury or death. Follow the
adjustment procedures exactly, or see your
POLARIS dealer for service.
1. Remove the upper headlight
2. Loosen the four handlebar
3. Adjust the handlebar to the
4. Be sure the handlebars do not
5. Torque the front two bolts to
Downloaded from
www.Manualslib.com
pod.
bolts.
desired height.
contact the gas tank or any
other part of the machine when
turned fully to the left or right.
10-12 ft. lbs. (14-17 Nm), then
torque the rear two bolts. A
gap of up to 1/8" (3 mm) will
remain at the rear of the clamp blocks.
manuals search engine
MAINTENANCE
Cam
High
Tension
Low
Tension
Handlebar
Bolts
117