Polaris Sportsman 570 EFI Owner's Manual page 125

Hide thumbs Also See for Sportsman 570 EFI:
Table of Contents

Advertisement

Cleaning and Storage
Storage Tips
Fluid Levels
Inspect the fluid levels. Add or change fluids as recommended in the
Periodic Maintenance Chart beginning on page 76.
• Demand drive unit (front gearcase)
• Rear gearcase (if equipped)
• Transmission
• Brake fluid (change every two years and any time the fluid looks dark
or contaminated)
• Coolant (test strength/fill)
Fog the Engine
1. After stabilizing the fuel, remove the spark plugs and add 2-3
2. Reinstall the spark plugs. Torque to specification.
3. Apply dielectric grease to the inside of the spark plug cap and
4. Turn the engine over several times using electric start. Oil will be
5. If POLARIS fuel system additive is not used, the fuel tank, fuel
Downloaded from
www.Manualslib.com
tablespoons of engine oil. To access the plug holes, use a section of
clear 1/4" hose and a small plastic squeeze bottle filled with the pre-
measured amount of oil.
reinstall the caps onto the plugs.
forced in and around the piston rings and ring lands, coating the
cylinder with a protective film of fresh oil.
lines, and injectors should be completely drained of gasoline.
manuals search engine
MAINTENANCE
123

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sportsman 570 eps

Table of Contents