Table of Contents
Advertisement
Available languages
Available languages
17. Slicer
18. Shredder
19. Light indicator
20. Power cord storage compartment (picture B)
21. Circuit breaker knob
22. Release button
INSTRUCTIONS FOR USE
appliance is turned off and unplugged.
1. Insert the screw (8) into feeding container (5).
2. Put the cross-shaped cutter (9) on the end of
the screw (8) so that the rounded tip of the cutter (9) is facing the
screw (8). Make sure the cross-shaped cutter (9) is properly
fixed.
3. Place the selected perforated disc (10) on top of the cutter (9) so
that the projection on feeding container (5) fit the slot in the disk.
4. Tighten the feeding container nut (11).
5. To attach feeding container (5) to the housing (1) insert it into
the opening in the grinder's housing and turn anticlockwise
until it is properly fastened.
6. Place the tray (6) on top of the funnel of feeding container
(5). Now the grinder is ready for operation.
1. Press the release button (22) and turn the feeding container
(5) clockwise. Remove feeding container (5) from the motor.
2. Untwist the feeding container nut (11).
3. Remove the perforated disk (10) and cross-shaped cutter (9) from
the screw (8). Remove the screw (8) from feeding container (5).
HOW TO MINCE MEAT
1. Place the grinder on a dry, smooth flat hori-
2. Remove the meat from the package. Cut out
BEFORE USE
Remove all packing materials from the appli-
ance.
Wipe the housing with damp lint free cloth
and wash all parts to be in contact with food.
Rinse the washed parts of the appliance with
clean water and completely dry them be-
fore assembling.
Before assembling/dismantling make sure the
Assembling
Dismantling
zontal surface.
all bones and tendons from the meat prior to
grinding. Cut the meat into pieces that will fit
easily into the grinder funnel.
6
Advertisement
Table of Contents
