Getting Started; Button Operation - Sena 10s User Manual

10S
3. Align the arrows on the clamp unit and microphone cables and
insert the microphone cable into the microphone connector.
Note:
1. After connecting all cables, store any excess cables behind the internal
padding of helmet to prevent wires from becoming damaged.
2. Three cables connect to the main unit. The longest is the cable for the
right speaker. The second longest cable is for the left speaker. The
shortest cable is for the microphone.
CAUTION:
When you remove the headset, make sure that you first detach all cables
from the clamp unit. Then it is safe to remove the main unit and clamp unit
in order.
14

4 GETTING STARTED

4.1 Button Operation

Status LED
Charging
LED
DC Power Charging &
Firmware Upgrade Port
10S Headset Buttons
Jog Dial
• Answer and end a mobile phone call
• Reject an incoming mobile phone call
• Start and end an intercom conversation
• Volume adjustment by rotating
• Play and pause Bluetooth stereo device
• Track-forward and track-back by rotating while
pressing the button
• Enter into intercom pairing mode
• Enter into voice configuration setting
• Navigate through configuration menu
• Seek FM radio station
Phone Button
• Answer and end a mobile phone call
• Speed dial
• Call transfer between mobile phone and headset
• Enter into mobile phone pairing mode
• Enter into Bluetooth stereo device pairing mode
• Enter into factory reset mode
• Turn on/off FM radio