Making Remote Control Settings - Panasonic KX-VC300 User Manual

settings will not match the location of the Digital
Boundary Microphone.
Making Remote Control
Settings
You can specify a remote control ID from 1, 2, or 3 for
both the remote control and the unit. The unit responds
to signals from any remote control with the same remote
control ID as itself. If you do not specify an ID, the unit
responds to signals from all remote controls. You can
confirm the remote control ID for the unit on the Home
screen (Page 36).
1.
Press [Menu].
•
The Menu screen is displayed.
2.
Use [ ][ ] to select "Settings" and press
[Enter].
•
The system settings screen is displayed.
3.
Press [ ].
•
The second page is displayed.
4.
Use [ ][ ] to select "Remote Ctrl ID" and press
[Enter].
•
The remote control settings screen is displayed.
5.
Use [ ][ ] to select the following items for input:
"Remote ID enable": Use [
"ON" or "OFF" (default).
•
When "ON" is selected, you can set a specific
remote control ID for the unit.
•
When "OFF" is selected, the unit will respond
to all remote controls.
Document Version 2013-09
][ ] to select
"Remote control ID": Use [
remote control ID ("ID1" [default]/"ID2"/"ID3") for
the unit.
"Check ID mismatch": Use [
"ON" (default) or "OFF".
•
When "ON" is selected, if the unit receives a
signal from a remote control that has an ID
different from the one specified on the Home
screen, a warning is displayed. Follow the
procedures on the screen to change the remote
control ID.
•
When "OFF" is selected, even if the unit
receives a signal from a remote control that has
an ID different from the one specified, no
warning is displayed on the Home screen.
Note
•
If multiple remote controls with assigned
IDs are being used close together, it is
recommended that you select "OFF" for
"Check ID mismatch".
6.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
7.
Use [ ][ ] to select "Yes" and press [Enter].
8.
When "Remote ID enable" is set to
"ON" (Page 105):
The dialogue box for changing the ID of the remote
control is displayed. Proceed to step 9.
Note
•
While the dialogue box is displayed, video
conference calls cannot be received.
Contacts and Settings
][ ] to select a
][ ] to select
User Manual 105