Panasonic KX-VC300 User Manual page 64

Controlling a Video Camera
2
Use [ ][ ] to select the site to display and press
[Enter].
•
The camera control screen is displayed.
3 Press the buttons on the remote control to operate the
video camera.
[B]: Zoom out
[R]: Zoom in
[ ][ ]: Pan the video camera left/right.
[ ][ ]: Tilt the video camera up/down.
•
The movement continues as long as you hold down
the button, and stops when you release the button.
For finer control of the movement, press the button
and immediately release it, and repeat this in
succession.
•
To control another site's video camera, press [Y].
Each time [Y] is pressed, the order of the sites listed
in the site selection dialogue box will change.
Example: During a 4-party video conference call
Site 1
•
To return to the video conference call screen, press
[Back].
Note
•
You can press [Full Screen] on the remote control to display/hide the guide area. You can specify in
the administrator menu (Page 123) whether the entire guide area is hidden, or only a portion of it.
•
In the following cases, you will not be able to control a video camera, even if you press [CAM Ctrl].
–
While displaying the computer's screen.
–
While displaying the unit information screen or the connections status screen.
–
While displaying a dialogue box.
64 User Manual
Site 2 Site 3
Local Site
Document Version 2013-09