Panasonic KX-VC300 User Manual page 30

Preparation
Note
•
Set the hub/router to Auto Negotiation
mode.
•
If the system is set to 100M Full Duplex, it
is necessary to change the system setting.
For details, contact your dealer.
•
Do not connect to a hub/router set to Half
Duplex.
•
For more details about routers and DCEs,
refer to the documentation for each device.
5.
Connect the power cord to the AC adaptor.
•
Use only the power cord included with the unit.
6.
Insert the AC adaptor's DC cord (G) into the DC IN
terminal on the back of the unit.
•
Use only the AC adaptor included with the unit.
7.
Plug in the power cord into the power outlet.
•
Choose an outlet that is convenient for
plugging/unplugging.
System Layout Examples
Display and Main Video Camera
Place the display and main video camera at the same
side of the room.
Note
•
If you use speakers, refer to "Amplifier/Active
Speaker Connection" (Page 33).
30 User Manual
Digital Boundary Microphones (KX-VC600
only)
Up to 4 Digital Boundary Microphones can be
connected in cascade. There are no separate terminals
for input and output on the Boundary Microphones.
Also, an Analogue Boundary Microphone and
general-purpose microphones can be used
simultaneously.
Note
•
Make sure that the microphones are placed at
least 1 m (3.3 ft) away from the display and
speakers.
•
Do not connect more than 4 Digital Boundary
Microphones. Doing so will cause all Digital
Boundary Microphones to stop working. If an
Analogue Boundary Microphone is also
connected, all audio input from the Analogue
Boundary Microphone will also stop working.
•
If both of the following conditions are met, the
output sent to the other party will be stereo;
otherwise, monaural:
–
The bandwidth is higher than approximately
1.8 Mbps in a 2-party video conference call
with the HD Visual Communication Unit
using SIP.
–
The MIC position is set automatically or
manually to collect a sound in stereo
(Page 102, Page 103).
•
If a headset is connected, audio from the
headset microphone is given priority, and audio
from Digital Boundary Microphones is no longer
picked up.
The range of each microphone (the radius of the circle
with a microphone at the centre) varies according to the
level of surrounding and the number of microphones
being used. Place microphones accordingly, referring
to the following table.
Document Version 2013-09