Making Remote Control Settings - Panasonic KX-VC300 User Manual

Contacts and Settings
When setting Digital Boundary Microphones
parallel with the display:
Display
Speaker
R ch
MIC 1
Connector
MIC 1: "Right side"
MIC 2: "Center Mono"
MIC 3: "Left side"
When setting Digital Boundary Microphones as
follows:
Speaker
R ch
Connector
MIC 1: "Right side"
MIC 2: "Center Mono"
MIC 3: "Left side"
Note
•
Make some noise near the Digital Boundary
Microphone. "
which Digital Boundary Microphone picks
up the noise.
•
" " is not displayed when the Digital
Boundary Microphone is mute.
•
" " is not displayed when multiple Digital
Boundary Microphones pick up the sound at
the same time.
94 User Manual
Main video camera
Speaker
MIC 2 MIC 3
Display
Main video camera
Speaker
MIC 1 MIC 3
MIC 2
" is displayed to indicate
•
8.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
L ch
9.
Use [
•
The system settings screen is displayed.
10.
Press [Home].
•
The Home screen is displayed.
Note
•
Do not move Digital Boundary Microphones
after completing settings. Otherwise the
settings will not match the location of the Digital
Boundary Microphone.
Making Remote Control
Settings
You can specify a remote control ID from 1, 2, or 3 for
both the remote control and the unit. The unit responds
to signals from any remote control with the same remote
control ID as itself. If you do not specify an ID, the unit
responds to signals from all remote controls. You can
L ch
confirm the remote control ID for the unit on the Home
screen (Page 30).
1.
Press [Menu].
•
The Menu screen is displayed.
2.
Use [
[Enter].
•
The system settings screen is displayed.
3.
Press [
•
The second page is displayed.
When the Digital Boundary Microphone is
mute, the sound made by pressing the MIC
Mute button might make "
][ ] to select "Yes" and press [Enter].
][ ] to select "Settings" and press
].
" appear.