Panasonic KX-VC300 User Manual page 85

Displaying the Sub Video Camera's Image
You can switch the display from the main video camera to a sub video camera during a video conference call.
1 Press [Camera Sub].
•
The sub video camera's image is displayed. The image is
also visible on the other party's display.
Note
•
When using H.323 or connecting to an MCU or
non-Panasonic video conference system, the same
image may not be shown on the other party's display
depending on the other party's screen layout. Ask the
other party to change their screen layout to display
your sub video camera's image.
Note
•
Pressing [Full Screen] on the remote control will hide or
unhide the other party's information, duration, and guide
displays.
•
When connecting to another Panasonic HD Visual
Communication Unit:
–
While displaying your sub video camera's image, the
other party cannot press [Camera Sub] to display
their own sub video camera's image.
–
If a computer is connected you can also switch to the
computer screen's image by pressing [PC]
(Page 78). Only the party that pressed [Camera
Sub] can perform this operation. To return to
displaying your sub video camera's image, press
[Camera Sub].
–
While displaying your sub video camera's image, you
can switch to displaying the other party's image in
Layout 1 by pressing [B] (Page 55, Page 57,
Page 60). However, the other party cannot perform
this operation, and the other party cannot confirm if
you are viewing your sub video camera's image or
the other party's image. When viewing the other
party's image, the screen layout is fixed to Layout
1. To return to displaying your sub video camera's
image, press [B].
Document Version 2013-09
Displaying Other Video Sources
1
User Manual
2
85