Of Section "8.7 Radio Disassembly" On Page; Color Display; Back Chassis Assembly - ASTRO APX 7000 Basic Service Manual

Disassembly/Reassembly Procedures: Serviceable Components of the Main Sub-Assemblies
8.8.7 Servicing Back Chassis Assembly (M) – Dual Display Version
Complete steps
Speaker Seal (43)
NOTE: Take care not to damage the Color Display during disassembly.
8.8.7.1 Servicing Color Display
1. Disconnect the Back Chassis Flex from the back of the Color Display (44).
2. Gently pry the Color Display out of the Back Chassis Assembly (41) by using the Black Stick
against the white section of the frame (upper left corner at the back of the Color Display).
3. Remove any remnants of the Display's Pad if it does not come off completely with the Color
Display from the back Chassis Assembly.
4. Clean the area to ensure it is free of adhesive and debris once the Display is completely
removed.
5. Ensure there are no foreign material on the new Color Display or the Lens (42).
6. Remove the liner from the new Color Display and seat it into the Back Chassis Assembly.
7. Ensure the Display is oriented correctly and seated properly.
8.7.1 through 8.7.5 of
Lens (42)
Figure 8-34. Back Chassis Assembly (Dual Display Version)
Take care not to damage the Back Chassis seal while
servicing the Back Chassis.
Section "8.7 Radio Disassembly" on page 2:8-12

Color Display (44)

Back Chassis Assembly (41)

Sec 2: 8-25