Sec 1: 8-36
8.9.1.8 Assemble Bluetooth Option Board Assembly (if so equipped)
1. Connect the Bluetooth Option Board Assembly to the VOCON Board Assembly. Ensure it is
completely connected as shown in
2. Rotate the Bluetooth Option Board locking levers till they slide under the chassis feature and
lock the option board in place. Levers should be fully rotated until they rest as shown in
Figure 8-51.
8.9.1.9 Assemble Speaker Module (B)
1. Apply a thin film of Lubricant (Part Number 1110027B23) to the upper two corners of the
Main Chassis (3) in the Speaker Module (23) opening as shown in
lubricant contaminates the gold pads or the microphone membrane.
Figure 8-50.
Figure 8-50. Assemble Bluetooth Option Board
Figure 8-51. Lock Levers
Do not touch the speaker cone or the Port Seal (25). Take
extra precaution to make sure neither the speaker nor the
breather pad is damaged.
Figure 8-52. Lubricate Main Chassis
Disassembly/Reassembly Procedures: Radio Reassembly
Bluetooth Option Board
Levers at Lock Position
Apply Lubricant
Figure 8-52.
Ensure no