Disassembly/Reassembly Procedures: Serviceable Components of the Main Sub-Assemblies
8.8.3
Servicing Knobs and Top Bezel Assembly (H)
Antenna Spanner Nut (19)
Antenna Washer (18)
Secure Lever (14)
8.8.3.1 Secure Lever
1. Complete steps from
2. Pull the Secure Lever (14) straight out of Control Top Bezel Assembly (11) as shown in
Figure 8-31.
3. Insert the lever's arm into the bezel's slot.
NOTE: All serviceable components on the Top Bezel Assembly are shown in
8.8.4
Servicing VOCON Board Assembly (G, O)
8.8.4.1 Back up Battery
1. Complete steps from
Disassembly" on page
2. Remove the battery with the Black Stick.
NOTE: Make sure the positive side is facing upwards.
3. Press the new battery into the battery carrier until it is secured and fully snapped into place.
NOTE: There are no other serviceable components on the VOCON Board Assembly.
Frequency Knob (13)
Figure 8-31. Top Bezel Assembly
Section 8.7.8.
Battery (37)
VOCON Board
Figure 8-32. VOCON Board Assembly
Section 8.7.1.
1:8-12.
of
Section "8.7 Radio Disassembly" on page
through
Section 8.7.7.
Volume Knob (12)
Torque Adder (15)
Volume Spanner Nut (17)
Volume Washer (16)
Control Top Bezel Assembly (11)
1:8-12.
Figure 8-31.
of
Section "8.7 Radio
Sec 1: 8-23