Sec 1: 8-14
Flex Connectors
Figure 8-17. Remove Flex Connectors and Expansion Board Assembly
2. Remove the Expansion Board Assembly (C) by gently lifting up the right side of the PCB as
shown in
3. If the VOCON Board Assembly (G, O) is to be removed from the Control Top Assembly (J),
then remove the Connector Plug (32) with the Black Stick and unplug the Control Top
Assembly flex as shown in
If the radio is equipped with an Bluetooth Option Board Assembly in lieu of the Connector
Plug (32):
i. rotate the Bluetooth Option Board locking levers to unlock the option board and free it
for removal as shown in
ii. unplug the Bluetooth Option Board Assembly from the VOCON Board Assembly by
using the Black Stick as shown in
Figure 8-17.
Figure 8-17.
Figure 8-18.
Figure 8-18. Unlock Levers
Figure 8-19. Remove Bluetooth Option Board
Disassembly/Reassembly Procedures: Radio Disassembly
Connector Plug (32)
Expansion Board Assembly (42)
Locking Levers
Figure 8-19.
Bluetooth Option Board