Brother mfc490w Quick Start Manual page 13

Wired Network
15
Connect the power cord
a
Connect the power cord.
16
Install MFL-Pro Suite
a
Put the supplied CD-ROM into your CD-ROM
drive. Follow the on-screen instructions.
b
The CD-ROM main menu will appear. Click
Install MFL-Pro Suite.
c
Follow the on-screen instructions.
d
Choose Wired Network Connection, and
then click Next.
e
®
For Windows XP SP2/Windows Vista
when Firewall detected screen appears,
choose Change the Firewall port settings to
enable network connection and continue
with the installation. (Recommended) and
click Next.
If you are using a firewall other than Windows
Firewall see the instructions provided with your
firewall software for information on how to add
the following network ports.
For network scanning, add UDP port 54925.
For network PC-Fax receiving, add UDP port
54926.
If you still have trouble with your network
connection, add UDP port 137.
Note
• If the machine is configured for your network,
choose the machine from the list, and then click
Next.
If your machine shows APIPA in the IP
Address field, click Configure IP Address
and enter an IP address for your machine that
is suitable for your network.
• If the machine is not yet configured for use on
your network, the screen prompts you to click
OK, and then the Configure IP Address
window will appear. Enter an IP address for
your machine that is suitable for your network
by following the on-screen instructions.
f
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another.
g
When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions.
17
a
Click Finish to restart your computer. After
restarting the computer, you must be logged on
with Administrator rights.
Finish
Now go to
Proceed to Install Optional Applications on
page 22.
®
users,
®
Windows
Finish and restart
The installation is now
complete.
®
13