Table of Contents
Advertisement
For Wireless Network Users
Restore the network settings to factory default
To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below.
a
Make sure the machine is not operating, then disconnect all the cables from the machine (except the power
cord).
b
Press Menu.
c
Press a or b to choose Network.
Press OK.
d
Press a or b to choose Factory Reset.
Press OK.
e
Press 1 to choose Yes.
f
Press 1 to choose Yes.
g
The machine will restart, re-connect cables once this is complete.
Entering Text for Wireless Settings
Most number keys have three or four letters printed on them. The keys for 0, # and l do not have printed letters
because they are used for special characters.
By pressing the proper number key repeatedly, you can access the character you want.
Putting spaces
To enter a space in a name, press c twice between characters.
Making corrections
If you entered a letter incorrectly and want to change it, press d or c to move the cursor under the incorrect
character, press Clear/Back. Re-enter the correct character. You can also back up and insert letters.
Repeating letters
If you need to enter a letter that is on the same key as the letter before, press c to move the cursor right before
you press the key again.
Special characters and symbols
Press l, # or 0 repeatedly until you see the special character or symbol you want. Press OK to select it.
Press l
for
(space) ! " # $ % & ' ( )
Press #
for
: ; < = > ? @ [ ] ^ _
Press 0
for
˜
0 \ { | }
+ , - . /
23
Advertisement
Table of Contents
