For Wireless Network Interface Users; Before You Begin - Brother mfc490w Quick Start Manual

For Wireless Network Users

For Wireless Network Interface Users

13

Before you begin

Although the Brother MFC-490CW can be used in a both wired and wireless network, only one of the connection
methods can be used at a time.
Important
If you have previously configured the wireless settings of the machine you must reset the network
(LAN) settings before you can configure the wireless settings again.
On your machine, press Menu. Press a or b to choose Network and press OK.
Press a or b to choose Factory Reset, and then press OK.
Press 1 twice for Yes to accept the change.
Note
The following instructions are for infrastructure mode.
To set up your machine in any other wireless environment you can find instructions in the Network User's
Guide on the CD-ROM.
You can view the Network User's Guide by following the instructions below.
1 Turn on your computer/Macintosh
®
For Windows :
2 Choose your model and the language. The CD-ROM main menu will appear.
3 Click Documentation, and then click HTML documents.
®
For Macintosh :
2 Double-click Documentation, and then double-click your language folder.
3 Double-click top.html.
16
®
. Insert the Brother CD-ROM into your CD-ROM drive.