Wiring Connection; Part List For Installation - Kenwood kdc-u359w Instruction Manual

Wiring connection

KDC-U359W
(for
Front output
Rear/subwoofer output
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis
of the car
Battery
14
KDC-U359B KDC-U259B
/ /
Fuse (10 A)
White
Light blue/yellow
White/Black
(Steering remote
control wire)
Gray
Gray/Black
Green
Blue/White
Green/Black
(Power control wire)
Purple
Purple/Black
Brown
(Mute control wire)
Red
(Ignition wire)
Yellow
(Battery wire)
KDC-U259R KDC-U259G KDC-U259A
/ / /
If no connections are made, do not let the wire
come out from the tab.
STEERING WHEEL
To the steering wheel remote control
REMOTE INPUT
adapter
REMOTE CONT
To the power control terminal when using
the optional power amplifier, or to the
antenna control terminal in the vehicle.
To the terminal that is grounded when the
telephone rings or during conversation.
(To connect the Kenwood navigation
system, refer your navigations manual.)
KDC-U2059
/ )

Part list for installation

(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
KDC-U2159B
(for
KDC-U2259R
(for other models)
(E) Extraction key
/
KDC-U2359G
/ )