Set Initial Settings; Getting Started - Kenwood kdc-u359w Instruction Manual

GETTING STARTED

1
Select the display language and cancel the demonstration
When you turn on the power (or after you reset the unit), the display
shows:
KDC-U2159B KDC-U2259R
• For /
"PRESS" "VOLUME KNOB"
• For other models: "CANCEL DEMO" "PRESS" "VOLUME KNOB":
Proceed to step 2.
1
Turn the volume knob to select [ENG] (English) or [RUS] (Russian), then
press the knob.
[ENG] is selected for the initial setup.
Then, the display shows: "CANCEL DEMO" "PRESS"
"VOLUME KNOB"
2
Press the volume knob.
[YES] is selected for the initial setup.
3 Press the volume knob again.
"DEMO OFF" appears.
2
Set the clock
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [CLOCK], then press the knob.
3 Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
5 Turn the volume knob to select [CLOCK FORMAT], then press the knob.
4
KDC-U2359G
/ : "SEL LANGUAGE"
6 Turn the volume knob to select [12H] or [24H], then press the knob.
7
Press and hold to exit.
(or)
1 Press and hold DISP SCRL to enter clock adjustment mode directly
while in clock display screen.
2 Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
To return to the previous setting item or hierarchy, press
3
Set the initial settings
1 Press SRC to enter STANDBY.
2
For [AUDIO CONTROL]: Press AUDIO to enter [AUDIO CONTROL].
For [TUNER SETTING] and [SYSTEM]: Press the volume knob to enter
[FUNCTION].
3
Turn the volume knob to make a selection (see the following table),
then press the knob.
4 Press and hold to exit.
To return to the previous setting item or hierarchy, press
AUDIO CONTROL
SWITCH PREOUT REAR/ SUB-W: Selects whether rear speakers or a subwoofer are
connected to the line out terminals on the rear (through an external
amplifier).
SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches
or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum
performance.
TUNER SETTING
PRESET TYPE NORMAL: Memorizes one station for each preset button in each band
( 5). ; MIX: Memorizes one station for each preset button, regardless of
the selected band.
.
.
Default: XX