Table of Contents
Advertisement
AUDIO SETTINGS
SUBWOOFER SET
ON: Turns on the subwoofer output. ;
OFF: Cancels.
LPF SUBWOOFER THROUGH: All signals are sent to
the subwoofer. ; 85HZ/ 120HZ/
160HZ: Audio signals with frequencies
lower than 85 Hz/ 120 Hz/ 160 Hz are
sent to the subwoofer.
SUB-W PHASE
REVERSE (180°)/
NORMAL (0°): Selects the phase of
the subwoofer output to be in line
with the speaker output for optimum
performance. (Selectable only if a
setting other than [THROUGH] is
selected for [LPF SUBWOOFER].)
FADER
R15 to F15 (0): Adjusts the rear and
front speaker output balance.
BALANCE
L15 to R15 (0): Adjusts the left and
right speaker output balance.
VOLUME OFFSET
–8 to +8 (for AUX) ; –8 to 0 (for
(Default: 0)
other sources): Presets the volume
adjustment level of each source.
(Before adjustment, select the source
you want to adjust.)
SOUND RECNSTR
ON: Creates realistic sound by
(Sound
compensating the high-frequency
reconstruction)
components and restoring the rise-
time of the waveform that are lost in
audio data compression. ; OFF: Cancels.
• [SUB-W LEVEL]/ [SUBWOOFER SET]/
[LPF SUBWOOFER]/ [SUB-W PHASE] is selectable
only if [SWITCH PREOUT] is set to [SUB-W]. ( 4)
• [SUB-W LEVEL]/ [LPF SUBWOOFER]/ [SUB-W PHASE] is
selectable only if [SUBWOOFER SET] is set to [ON].
10
DISPLAY SETTINGS
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [DISPLAY],
then press the knob.
3
Turn the volume knob to make a selection
(see the following table), then press the
knob.
Repeat step
3
until the desired item is
selected or activated.
4
Press and hold
to exit.
To return to the previous setting item or
hierarchy, press
.
DIMMER
ON: Dims the display illumination. ;
OFF: Illuminates according to the
[BRIGHTNESS] settings.
BRIGHTNESS
LVL 0 — LVL 31: Selects your preferred
brightness level for display illumination.
TEXT SCROLL
AUTO/ ONCE: Selects whether to scroll the
display information automatically, or scroll
only once. ; OFF: Cancels.
MORE INFORMATION
General
• This unit can only play the following CDs:
• Detailed information and notes about the playable audio
files are stated in an online manual on the following web
site: www.kenwood.com/cs/ce/audiofile/
Playable files
• Playable audio file: MP3 (.mp3), WMA (.wma)
• Playable disc media: CD-R/CD-RW/CD-ROM
• Playable disc file format: ISO 9660 Level 1/2, Joliet, Long
Default: XX
file name.
• Playable USB device file system: FAT12, FAT16, FAT32
Even when audio files comply with the standards listed
above, playback may be impossible depending on the types
or conditions of media or device.
Unplayable discs
• Discs that are not round.
• Discs with coloring on the recording surface or discs that
are dirty.
• Recordable/ReWritable discs that have not been finalized.
• 8 cm CD. Attempting to insert using an adapter may cause
malfunction.
About USB devices
• This unit can play MP3/WMA/WAV files stored on a USB
mass storage class device.
• You cannot connect a USB device via a USB hub.
• Connecting a cable whose total length is longer than 5 m
may result in abnormal playback.
• This unit cannot recognize a USB device whose rating is
other than 5 V and exceeds 1 A.
Hide quick links:
Advertisement
Table of Contents
