Pioneer DDJ-SB2 Operating Instructions Manual page 4

About the Serato DJ Intro software
Serato DJ Intro is a DJ software application by Serato. DJ performances
are possible by connecting the computer on which this software is
installed to this unit.
Minimum operating environment
Supported operating
CPU and required memory
systems
Intel
Mac: OS X v10.10, 10.9,
Intel
and 10.8
1 GB or more of RAM
Intel
Windows: Windows 8.1/8
Intel
and Windows 7 (SP1)
1 GB or more of RAM
Others
A USB 2.0 port is required to connect the computer
USB port
with this unit.
Display resolution Resolution of 1 024 x 768 or greater
An Internet connection is required for registering
Internet connection the "Serato.com" user account and downloading the
software.
! To check the latest information on the operating environment and compatibility,
and to acquire the latest operating system, access the Serato site.
http://serato.com/
! Operating System support assumes you are using the latest point release for
that version.
!
Operation is not guaranteed on all computers, even if all the required operating
environment conditions indicated here are fulfilled.
! Depending on the computer's power-saving settings, etc., the CPU and hard
disk may not provide sufficient processing capabilities. For notebook comput-
ers in particular, make sure the computer is in the proper conditions to provide
constant high performance (for example by keeping the AC power connected)
when using Serato DJ Intro.
!
Use of the Internet requires a separate contract with a provider offering Internet
services and payment of provider fees.
About the installation procedure
The installation procedure depends on the operating system (OS) on the
computer you are using.
For Windows
After installing the driver software, install the Serato DJ Intro software.
For Mac (OS X)
Only install the Serato DJ Intro software.
Installation Procedure (Windows)
Do not connect this unit and the computer during the period from the
start to completion of installation.
! Log on as the user which was set as the computer's administrator
before installing.
! If any other programs are running on the computer, quit them.
1 Access the Pioneer DJ site.
http://www.pioneerdj.com/
! To switch the screen to Japanese display, scroll the screen to the bot-
tom, click the [EN] indication at the bottom right of the screen and
then select [JA].
2 Click the [Support] icon.
3 Click the [Software & firmware updates] icon.
4 Click the [DDJ-SB2] icon in the [CONTROLLER]
category.
5 Click the [Drivers] icon.
6 Click the [Download link] icon and save the file.
4
En
®
processor, Core™ Duo 1.6 GHz or better
®
processor, Core™ i3, i5, or i7
®
processor, Core™ 2 Duo 2.0 GHz or better
®
processor, Core™ i3, i5, or i7
7 When downloading is complete, double-click the
[Pioneer_DJ_DDJ_SB2_Driver_x.xxx.exe] icon.
8 Proceed with installation according to the instructions
on the screen.
If [Windows Security] appears on the screen while the installation is
in progress, click [Install this driver software anyway] and continue
with the installation.
When the installation program is completed, a completion message
appears.
When the following screen appears, the installation is complete. (Click
[Close].)
After installing the driver software, install the Serato DJ Intro software.
9 Access the Serato site.
http://serato.com/
10 Click the [Serato DJ Intro] icon of [DJ PRODUCTS].
The Serato DJ Intro download page appears.
! The download page is subject to change without notice.
11 Click the [Download SERATO DJ INTRO] icon.
12 Create an account on "Serato.com."
! If you have already registered a user account on "Serato.com", pro-
ceed to step 14.
! If you have not completed registering your user account, do so fol-
lowing the procedure below.
— Following the instructions on the screen, input your e-mail
address and the password you want to set, then select the region
in which you live.
— If you check [E-mail me Serato newsletters], newsletters pro-
viding the latest information on Serato products will be sent from
Serato.
— Once user account registration is completed, you will receive an
e-mail at the e-mail address you have input. Check the contents
of the e-mail sent from "Serato.com".
! Be careful not to forget the e-mail address and password specified
when you performed user registration. They will be required for
updating the software.
! The personal information input when registering a new user account
may be collected, processed and used based on the privacy policy on
the Serato website.
13 Click the link in the e-mail message sent from "Serato.
com".
The Serato DJ Intro download page opens. Proceed to step 15.
14 Log in.
Input the e-mail address and password you have registered to log in to
"Serato.com".
15 Check [DDJ-SB2] for the model to be used and then
click the [Continue] icon and save the file.
16 Click the [Download Serato DJ Intro] icon.
Unzip the downloaded file, then double-click the unzipped file to launch
the installer.