Table of Contents
Advertisement
About the driver software
(Windows)
This unit functions as an audio device conforming to the ASIO
standards.
Using the ASIO settings utility software
This function can only be used by those using a Windows operating
system.
Launching the ASIO settings utility software
Click the Windows [Start] menu>[All
Programs]>[Pioneer]>[DDJ_SB2]>[DDJ_SB2 ASIO Settings
Utility].
! For Windows 8.1/8, click [DDJ_SB2 ASIO Settings Utility] from the
[Start] screen.
Adjusting the buffer size
In the same way as the buffer size setting in the Serato DJ Intro software,
decreasing the value of the [Kernel Buffers] setting lowers the transfer
delay (latency) of the audio data, while increasing the value reduces the
tendency for dropouts in the audio data (breaks in the sound).
The setting at [USB BUFFER SIZE (LATENCY)] in the Serato DJ Intro soft-
ware’s [SETUP] menu has priority for the buffer size. (The default setting
is 512 samples/10 ms.)
! For details on making the settings on the DJ software, see the Serato
DJ Intro software manual.
! If the [Buffer Size] or [Kernel Buffers] number is made large, drops
in the data (breaks in the sound), etc., occur less easily, but the time
lag due to transmission delays in the audio data (latency) increases.
If breaks in the sound occur with the default
setting
1 Launch [DDJ_SB2 ASIO Settings Utility] and change
[Kernel Buffers] to [4].
2 Set [USB BUFFER SIZE (LATENCY)] in the Serato DJ
Intro software to the minimum buffer size at which no
breaks in the sound occur.
If no breaks in the sound occur with the default
setting
1 Set [USB BUFFER SIZE (LATENCY)] in the Serato DJ
Intro software to the minimum buffer size at which no
breaks in the sound occur.
2 Launch [DDJ_SB2 ASIO Settings Utility], change
[Kernel Buffers] to [2], and check that no breaks in the
sound occur.
3 If no breaks in the sound occur, set [USB BUFFER
SIZE (LATENCY)] in the Serato DJ Intro software to the
minimum buffer size at which no breaks in the sound
occur. If breaks in the sound do occur, change [Kernel
Buffers] in the [DDJ_SB2 ASIO Settings Utility] to [3].
Checking the version of the driver
software
Click the Windows [Start] menu>[All
Programs]>[Pioneer]>[DDJ_SB2]>[DDJ_SB2 Version
Display Utility].
! For Windows 8.1/8, click [DDJ_SB2 Version Display Utility] from
the [Start] screen.
! You can check the firmware version of this unit on the screen.
! The firmware version is not displayed when this unit is not connected
to the computer or when this unit and computer are not properly
communicating.
Page 6
Hide quick links:
Advertisement
Table of Contents
