Table of Contents
Advertisement
Browser section
1
1 LOAD button
Press:
The selected tracks are loaded to the respective decks.
! If you press the [LOAD] button twice on the side opposite to the
deck currently playing, the state of the deck currently playing
is also applied as is to the deck on the opposite side. (Instant
double)
2 Rotary selector (BACK)
Turn:
The cursor in the library panel or [crates] panel moves up or down.
Press:
When the cursor is in the [crates] panel or library panel, the cursor
moves between the [crates] panel and library panel each time the
rotary selector (BACK) is pressed.
When the cursor is in the [Files] panel, the cursor moves to a lower
layer.
[SHIFT] + press:
When the cursor is positioned in the [crates] panel, the sub crates
open or close.
When the cursor is positioned in the library panel, the cursor moves
to the [crates] panel.
The cursor on the [Files] panel moves to a higher layer.
Deck section
This section is used to control the four decks. Controls and buttons
to operate decks 1 and 3 are located on the left side of the controller,
and those to operate decks 2 and 4 are located on the right side of the
controller.
1
2
3
4
5
6
b
a
c
8
En
1 2
7
8
9
a
b
c
d
d
e
f
1 TEMPO slider
Use this to adjust the track playing speed.
2 Jog dial
Turn top:
When the vinyl mode is on, the scratch operation is possible.
When the vinyl mode is off, the pitch bend operation (adjustment of
the playing speed) is possible.
Turn outer section:
The pitch bend operation (adjustment of the playing speed) is
possible.
[SHIFT] + Turn top:
When the jog dial is spun while pressing [SHIFT] button during
playback, the track is fast-forwarded/fast-reversed.
3 KEY LOCK (TEMPO RANGE) button
Press:
Turns the key lock function on and off.
When the key lock function is on, the key does not change even when
the playing speed is changed with the [TEMPO] slider.
! The sound is digitally processed, so the sound quality decreases.
[SHIFT] + press:
The [TEMPO] slider's range of variation switches each time the but-
ton is pressed.
[±8%]
4 DECK 3 button
Press:
Switches the deck to be operated.
When the deck indicator is lit, deck 3 is selected.
The deck on the right side has a [DECK 4] button.
5 VINYL (SLIP) button
This switches the vinyl mode on/off.
[SHIFT] + press:
Serato DJ
Turns the slip mode on and off.
6 PAD TRANS (TAP) button
Press:
Turns the pad trans mode on and off.
= Using pad trans (p. 18 )
[SHIFT] + press:
Sets the beats for which the pad trans mode operates manually.
When the button is pressed three or more times, the beat is set by
calculating from the interval at which the button was pressed.
= Using pad trans (p. 18 )
7 HOT CUE (HOTCUE5-8) mode button
Press:
Sets the hot cue mode.
[SHIFT] + press:
Serato DJ
Sets the hot cue 5–8 mode.
8 AUTO LOOP (ROLL) mode button
Press:
Sets the auto loop mode.
[SHIFT] + press:
Serato DJ
Sets the roll mode.
[±16%]
[±50%]
Hide quick links:
Advertisement
Table of Contents
