Bosch VEZ-400 Series Installation Manual page 24

24 en | Installing a Pipe Mount (AUTODOME 4000)
2.
3.
4
2015.08 | | Wall + Pipe Mounts
Align the camera base with the mounting cap, and mount the base to the mounting cap
using the four (4) mounting screws supplied with the camera. In moist, wet, or outdoor
applications, make sure that all four mounting screws are equipped with a rubber seal
ring, and that they are tightened fully to ensure protection against water ingress.
Mount the dome cover to the camera base. In moist, wet, or outdoor applications, make
sure that all three mounting screws are equipped with a rubber seal ring, and that they
are tightened fully to ensure protection against water ingress.
Make the necessary connections to the camera. See the next chapter.
Installation Manual
AUTODOME 4000 Mini PTZ Dome
Bosch Security Systems, Inc.