Bosch VEZ-400 Series Installation Manual page 14

14 en | Installing a Wall Mount (AUTODOME 4000)
Figure 4.1: Wall Mount Dimensions
2.
3.
Figure 4.2: Metal Conduit
4.
5.
6.
2015.08 | | Wall + Pipe Mounts
Fit a user-provided metal single-gang junction box to the wall. In moist, wet, or outdoor
applications, ensure that the junction box is rated accordingly.
Attach a grounded metal conduit to the junction box clamp.
Feed the wires through the conduit.
Attach the mounting cap to the arm of the wall mount. In moist, wet or outdoor
applications, make sure that the thread on the arm is sufficiently taped with Teflon tape
before the mounting cap is attached.
Feed all wires from the camera through the arm into the metal conduit using a wire puller
tool. In moist, wet, or outdoor applications, make sure that the rubber seal is placed
between the arm and the junction box or mounting surface before the connections are
made.
Installation Manual
AUTODOME 4000 Mini PTZ Dome
Bosch Security Systems, Inc.