Massage Programs And Selections - Brookstone OSIM uDevine Manual

Massage programs and selections

Setting
1. Turn on the controller by pressing [ ].
2. By default, the Quick massage program icon [
will illuminate on standby for selection.
3. Using the 4-way directional buttons,
press 'DOWN' to select Settings [ ].
4. Press [ OK ] to proceed to the next screen.
The Shoulder Position icon [ ] will light up.
18
]
Massage programs and selections
7. Massage will begin after detection is completed.
Refer to #9.
Note: Manually adjust the shoulder height position
by pressing [OK] during the Auto Shoulder Detection
function. Refer to #8.
8. Using the 4-way directional buttons 'UP' or 'DOWN'
to adjust your desired shoulder height (9 levels).
Press [OK] to confirm your selection and start the
program. The screen will return to the Sub-menu.
Note: Press [ ] to return to the Main Menu.
9. The pre-set massage program will start after the
Auto Shoulder Detection function. The screen
will then return to the Sub-menu and reflect the
massage process status.
23
Sub-menu