Brookstone OSIM uDevine Manual page 13

Massage programs and selections
13. At the Sub-menu screen, the Shoulder Position
Adjustment icon [ ] will illuminate for your
selection.
14. Press [OK] to view the Shoulder Position
Adjustment (9 levels) screen.
15. Use the 4-way directional buttons 'UP' or 'DOWN'
to adjust desired shoulder height. Press [OK] to
confirm your selection and return to the Sub-menu.
Note: The screen will automatically return to the
Sub-menu when no selection is made. Press [
to return to the previous screen.
16. The desired massage program will begin once
selected.
28
]
Preparation before use
Adjusting the shoulder
massage units
• Slightly push to adjust the shoulder
massage units to your desired width
(2 width positions available).
• For a balanced massage experience,
it is advisable to have both shoulder
massage units at similar width positions.
Shoulder
massage unit
Adjusting the arm
massage units
• Raise both sides of the arm massage
units fully as shown.
Arm massage unit
13
Power ON/OFF
• Connect the power cord to the uDivine
power inlet.
• Insert the power plug of the uDivine into
the electrical outlet.
• Turn ON/OFF the main switch located at
the back of the uDivine.
Power inlet
Caution
• Make sure the power cord is not placed
under the uDivine.
• Make sure all switches are in the OFF
position (including the main power
switch) before connecting the power
plug to an electrical outlet.
Checking the backrest pad
• Lift the backrest pad to ensure that there
is no hole or tear on the backrest pad.